User guide

Chapter 4: Initial Software Configuration
21
Note: The login display should appear verifying that the unit has
been properly configured and can be accessed from the network.
6. Log in with username admin and the password you created earlier.
7. On the Home page, click the Setup tab and select the various
configuration options for configuring the SX and each console port.
Modem Connection (Optional)
To configure the SX for a modem connection:
1. Connect a phone line to the modem port.
2. Write down the phone number for this line because it will be needed
when you configure a client for dialup networking.
See Appendix E: Modem Configuration (see "Modem Configuration"
on page 264) for details.