User guide

Chapter 4: Initial Software Configuration
18
Date / Time Configuration
1. Choose Setup > Date / Time. The Date / Time Configuration page
opens.
2. Select the correct time zone from the UTC Offset drop-down menu.
3. Select one of the following:
 User Specified Time - Click this radio button and enter the date
and time manually in the corresponding fields.
 Synchronize with NTP Server - Click this radio button and enter
the IP address of a Network Time Protocol (NTP) server in the
Primary Time Server. If you have a backup NTP server, enter its
IP address in the Secondary Time Server field.
4. Click OK.
Note: Features such as certificate generation depend on the correct
Timestamp, used to check the validity period of the certificate. In
addition, the Syslog and NFS logging features also use the system
time for time-stamping log entries.