User guide

264
If you are connecting to HyperTerminal via modem and are using a
Dominion SX prior to version 3.1.7, do not disconnect from
HyperTerminal without first properly logging off. Disconnecting without
logging off will cause the modem to still believe it is connected to
HyperTerminal, which prevents users from dialing back in and
reestablishing a connection. This issue only occurs with Dominion SX
versions prior to 3.1.7.
In This Chapter
Client Dial-Up Networking Configuration ............................................... 264
Windows NT Dial-Up Networking Configuration .................................... 264
Windows 2000 Dial-Up Networking Configuration ................................ 267
Windows Vista Dial-Up Networking Configuration (Shared KSX II, SX)271
Windows XP Dial-Up Networking Configuration .................................... 272
Client Dial-Up Networking Configuration
Configuring Microsoft Windows
®
Dial-Up Networking for use with
Dominion SX allows configuration of a PC to reside on the same PPP
network as the Dominion SX. After the dial-up connection is established,
connecting to a Dominion SX is achieved by pointing the web browser to
the PPP Server IP. Modem installation guidelines are provided for the
following client based systems:
 Windows NT
®
operating system
 Windows 2000
®
operating system
 Windows XP
®
operating system
Windows NT Dial-Up Networking Configuration
1. Choose Start > Programs > Accessories > Dial-Up Networking.
Appendix E
Modem Configuration