User guide

Appendix D: Server Configuration
255
3. Highlight Networking Services then click the Details... button.
4. Select the Internet Authentication Service checkbox and then click
OK.
5. Click Next> and continue with the wizard steps.
IAS Active Directory Access
If using a Domain Controller, set IAS to access the Active Directory
®
using the following steps:
1. Launch IAS (choose Start > All Programs > Administrative Tools >
Internet Authentication Service).
2. Right-click on Internet Authentication Service (Local) and select
Register Server in Active Directory.
Note: See the following Microsoft URL for information about Active
Directory:
http://support.microsoft.com/default.aspx?scid=kb;en-us;321051
Add Dominion SX to the client list
1. From the Internet Authentication Service, right-click on RADIUS
Clients and select New RADIUS Client.
2. Type a friendly name and the IP address of the SX unit.
3. Select the RADIUS Standard in the Client-Vendor drop-down menu,
and type a Shared Secret that matches the Dominion SX
configuration.
Create an IAS Policy
This section describes the steps to create a policy to allow Radius users
to access the Dominion SX. The example in this section requires two
conditions: the client source IP address of the Dominion SX and that the
UserID is a member of the SX User Group:
 NAS-IP-Address = Type the IP address of Dominion SX
 Windows-Group = SX User Group
Note: If you have multiple Dominion SX units or different models of
Dominion product family (DKX, DKSX or KX101), then using an
appropriate condition to match (NAS-IP-Address) rule will help apply the
correct policy for the appropriate Dominion unit.
1. From Internet Authentication Service, right-click on Remote Access
Policies and select New Remote Access Policy.
2. The New Remote Policy Wizard starts. Click Next>.
3. Select the Set up a custom policy radio button and type a Policy
name.