User guide

Appendix C: Certificates
250
Install Client Root Certificate into the DominionSX
In order for Client Certificates to be recognized as valid by the SX, the
Root Certificate of the CA that signed the Client Certificates must be
installed on the SX unit with the following steps:
1. Retrieve the CA's Root certificate used to sign the client certificates
and place it on an accessible FTP server
2. Choose Security > SSL Client Certificates.
3. Select Install Certificate Authority.
4. Fill in the FTP parameters to retrieve the CA Root certificate.
5. Click OK.
6. Make sure the Enable SSL Client Certificate checkbox is selected.
7. Restart the Dominion SX device for the settings to take place.
Install Client Certificate into Internet Explorer
Installing client certificate into Internet Explorer
®
mostly follows the steps
described in the following link:
http://www.microsoft.com/technet/prodtechnol/ie/reskit/6/part2/c06ie6rk.
mspx?mfr=true
Importing Certificates for LDAP
The Dominion SX will properly add only binary encoded certificates to
the local certdb. In order to import LDAP certificates, the certificates
should be retrieved from the LDAP's server and placed on an FTP server
from which the Dominion SX unit can retrieve them.
Retrieve LDAP Certificate via Access from HTTP Interface
The following steps must be taken in order to insert the Retrieved Server
certificate to Dominion SX from the GUI. The LDAPS Server certificate
should be available on a valid FTP Server to which you know the
authentication information.
1. Log into the Dominion SX as admin.
2. Click the Set tab.
3. Click the Remote Authentication button.
4. Click the LDAPS Certificate Settings link.
5. Fill in IP, username, password, and path to the LDAPS Certificate.