User guide

Appendix B: System Defaults
240
Item
Default
Logging to NFS
Serial Ports
Baud Rate
9600
Parity
None
Flow Control
None
In This Chapter
Initiate Port Access ................................................................................ 240
Supported Character Length of Various Field Types ............................ 241
Initiate Port Access
Use the following information for initiating port access:
Initiate port access using
Ports Kept open or Closed
Directions
HTTP
Ports 80, 443 and 5000 must be
kept open in the firewall for the unit
to operate. Port 5000 can be
configured.
Both
HTTPS SSL(S) only
TCP port 443 needs to be open;
port 80 can be closed
Both
SSH
TCP port 22 needs to be open
Both
Telnet
TCP port 23 needs to be open
Both
RADIUS
TCP port 1812 needs to be open
Outgoing
LDAP
Port 389 needs to be open
Outgoing
SNMP
Port 162 needs to be open
Outgoing
TACACS+
Port 49 needs to be open
Outgoing
Notes
For FTP Upgrades
Port 21 needs to be open
Outgoing
For syslog
UDP port 514 needs to be open
Outgoing