User guide

Chapter 15: Power Control
225
Scenario #1
Power Strip Status
CLI Input
Command: powerstrip name PowerStr1
Result
Status of PDU should correctly display the following
parameters:
Power Consumption
Average Power
Apparent Power
True RMS Voltage
True RMS Current
Maximum Current
Status of the outlet breaker
Internal Temperature
Scenario #2
Status of Power Strip that is actually turn off or
disconnected
Pre-condition
Administrator user is logged in via CLI.
Power strip device (DPX) named PowerStr1 is
disconnected from Port1 or turned off.
Administrator is in Power menu.
Action
Enter Command.
Press Enter.
CLI Input
Command: powerstrip name PowerStr1
Scenario #3
Power Strip Status - Outlet status
Pre-condition
Administrator user is logged in via CLI.
Power strip device (DPX) named PowerStr1 is
physically connected to Port1 of SX.
Action
Check the current status of outlets - outlet1 is turn on
Turn off outlet1.
Go to Power menu and check the status of outlet1.
CLI Input
powerstrip name PowerStr1
off powerstrip PowerStr1 outlet 1
powerstrip name PowerStr1