User guide

Chapter 15: Power Control
224
Scenario #8
Turn OFF Group and Port Association
simultaneously
Pre-condition
Administrator user is logged in via CLI.
Administrator is in power menu.
Group Association named Group1 (shown in Fg.1) is
already created. Port3 is already associated with
outlet8 of PowerStr1 which has been created and
available in the list.
Action
Enter Command.
Press Enter.
CLI Input
powerdelay sequence 2 cycle 5
off port 3 nodegroup Group1
Scenario #10
Recycle Group and Port Association
simultaneously
Pre-condition
Administrator user is logged in via CLI.
Administrator is in power menu.
Group Association named Group1 (shown in Fg.1) is
already created. Port3 is already associated with
outlet8 of PowerStr1 which has been created and
available in the list.
Action
Enter Command.
Press Enter.
CLI Input
powerdelay sequence 2 cycle 5
cycle port 3 nodegroup Group1.
CLI Power Strip Status
Description: Power Control Menu
Scenario #1
Power Strip Status
Pre-condition
Administrator user is logged in via CLI.
Power strip device (DPX) named PowerStr1 is
physically connected to Port1 of SX.
Administrator is in Power menu.
Action
Enter Command.
Press Enter.