User guide

Chapter 15: Power Control
223
Scenario #4
Turn OFF Group Association (outlets in
association are with different statuses)
CLI Input
Command: off nodegroup Group1
Scenario #5
Recycle Group Association
Pre-condition
Administrator user is logged in via CLI.
Administrator is in power menu.
Group Association named Group1 (shown in Fg.1) is
already created.
Action
Enter Command.
Press Enter.
CLI Input
powerdelay sequence 2 cycle 5
cycle nodegroup Group1
Scenario #6
Recycle Group Association (outlets in
association are with different statuses)
Pre-condition
Administrator user is logged in via CLI.
Administrator is in power menu.
Group Association named Group1 (shown in Fg.1) is
already created. Outlets in Group1 are with different
statuses.
Action
Enter Command.
Press Enter.
CLI Input
powerdelay sequence 2 cycle 5
cycle nodegroup Group1
Scenario #7
Turn ON Group and Port Association
simultaneously
Pre-condition
Administrator user is logged in via CLI.
Administrator is in power menu.
Group Association named Group1 (shown in Fg.1) is
already created. Port3 is already associated with
outlet8 of PowerStr1 which has been created and
available in the list.
Action
Enter Command.
Press Enter.
CLI Input
powerdelay sequence 2 cycle 5
on port 3 nodegroup Group1