User guide

Chapter 15: Power Control
221
Scenario #3
Association Power Control - Recycle Port
Association (Target is associated to Two Outlets
from two different Power Strip devices)
Port Power Association named Target2 is already
created and available in the list.
Outle1 of PowerStr1 is associated to Target2.
Administrator is in Power Control > Associations
Power Control menu.
Action
Select Port Association named Target2
Click on Power Recycle Interval and enter value
Press Recycle button.
CLI Input
Power Recycle Interval value: 1 sec.
Scenario #4
Association Power Control - Recycle Port
Association (outlets in the association are with
different statuses)
Pre-condition
Administrator user is logged in via GUI.
Two Power Strip devices (DPX) named PowerStr1
and PowerStr2 are physically connected to SX
Ports.
Port Power Association named Target2 is already
created and available in the list.
Outle1 of PowerStr1 and Outlet2 of PowerStr2 are
associated to Target2.
Outlet1 and Outlet2 are with different statuses.
Administrator is in Power Control > Associations
Power Control menu.
Action
Select Port Association named Target2
Click on Power Recycle Interval and enter value:
Press Recycle button.
CLI Input
Power Recycle Interval value: 1 sec.
CLI Association Power Control - Group Association
Description: Power Control Menu
Scenario #1
Turn ON Group Association
Pre-condition
Administrator user is logged in via CLI.