User guide

Chapter 15: Power Control
220
Scenario #1
Association Power Control - Recycle Port
Association (Target is associated to One
Outlet)
Pre-condition
Administrator user is logged in via CLI.
Power Strip device (DPX) named PowerStr1 is
physically connected to Port1 of SX.
Port Power Association named Target2 is already
created and available in the list.
Outle1 of PowerStr1 is associated to Target2.
Administrator is in Power Control > Associations
Power Control menu.
Action
Select Port Association named Target2
Click on Power Recycle Interval and enter value:
Press Recycle button.
CLI Input
Power Recycle Interval value: 1 sec.
Scenario #2
Association Power Control - Recycle Port
Association (Target is associated to Two Outlets
from one Power Strip)
Pre-condition
Administrator user is logged in via CLI.
Power Strip device (DPX) named PowerStr1 is
physically connected to Port1 of SX.
Port Power Association named Target2 is already
created and available in the list.
Outle1 of PowerStr1 is associated to Target2.
Administrator is in Power Control > Associations
Power Control menu.
Action
Select Port Association named Target2
Click on Power Recycle Interval and enter value:
Press Recycle button.
CLI Input
Power Recycle Interval value: 1 sec.
Scenario #3
Association Power Control - Recycle Port
Association (Target is associated to Two Outlets
from two different Power Strip devices)
Pre-condition
Administrator user is logged in via CLI.
Power Strip device (DPX) named PowerStr1 is
physically connected to Port1 of SX.