User guide

Chapter 15: Power Control
218
Scenario #2
Switch on/off all Outlets
Pre-condition
Administrator user is logged in via CLI.
Power Strip device (DPX) named PowerStr1 is
physically connected to Port1 of SX.
Administrator is in power menu.
Action
Enter Command.
Press Enter.
CLI Input
on powerstrip PowerStr1 outlet *
off powerstrip PowerStr1 outlet *
Scenario #3
Switch on/off group of outlets
Pre-condition
Administrator user is logged in via CLI.
Power Strip device (DPX) named PowerStr1 is
physically connected to Port1 of SX.
Administrator is in power menu.
Action
Enter Command.
Press Enter.
CLI Input
on powerstrip PowerStr1 outlet 1,3,7
off powerstrip PowerStr1 outlet 1,3,7
Scenario #4
Power rescycle group of outlets
Pre-condition
Administrator user is logged in via CLI.
Power Strip device (DPX) named PowerStr1 is
physically connected to Port1 of SX.
Administrator is in power menu.
Action
Enter Command.
Press Enter.
CLI Input
cycle powerstrip PowerStr1 outlet 1,3,7
Scenario #5
Sequence interval for switch off operation
Pre-condition
Administrator user is logged in via CLI.
Power Strip device (DPX) named PowerStr1 is
physically connected to Port1 of SX.
Administrator is in power menu.
Action
Enter command to set sequence interval.