User guide

Chapter 15: Power Control
216
Scenario #2
Power strip configuration after factory reset
CLI Input
Command: factoryreset
CLI Power Association Group
Description: Power > PowerGroups menu
Scenario #1
Create new power group
Pre-condition
Administrator user is logged in via CLI.
Power strip device (DPX) named PowerStr1 is
physically connected to Port1 of SX.
Administrator is in Power > PowerGroups menu.
Action
Enter Command.
Press Enter.
CLI Input
Command: addpowergroup name "Test Group"
description "Test group"
Scenario #2
Add a port to a power group
Pre-condition
Administrator user is logged in via CLI.
Power strip device (DPX) named PowerStr1 is
physically connected to Port1 of SX.
Administrator is in Power > PowerGroups menu.
Action
Enter Command.
Press Enter.
CLI Input
Command: addpowergroupport name "test Group"
port port 2
Scenario #3
Add multiple ports to a power group
Pre-condition
Administrator user is logged in via CLI.
Power strip device (DPX) named PowerStr1 is
physically connected to Port1 of SX.
Administrator is in Power > PowerGroups menu.
Action
Enter Command.
Press Enter.