User guide

Chapter 15: Power Control
215
Scenario #1
Remove port power association
Action
Enter command.
Press Enter.
CLI Input
Command: unassociate port 1 powerstrip PowerStr1
outlet 1
Scenario #2
Delete multiple outlets association
Pre-condition
Administrator user is logged in via CLI.
Power Strip device (DPX) is physically connected and
configured to the SX named PowerStr1.
User is in power menu.
Action
Enter command.
Press Enter.
CLI Input
Command: unassociate port 1 powerstrip PowerStr1
outlet 1,4,7
CLI Power Strip Configuration
Description: Power Control Menu
Scenario #1
Configure an SX port to contain a power strip
device (the port is previously connected to a
power strip)
Pre-condition
Administrator user is logged in via CLI.
Power Strip device (DPX) is physically connected to
Port1 of SX. Administrator is in power menu.
Action
Enter command.
Press Enter.
CLI Input
setpowerport name PowerStr1 type DPCS12 port 1
Scenario #2
Power strip configuration after factory reset
Pre-condition
Power strip device (DPX) named PowerStr1 is
physically connected to Port1 of SX.
SX user has already configured the port as a Power
Strip.
Action
Log in to SX unit with administrator privileges via CLI.
Go to Maintenance menu
Perform Factory Reset