User guide

Chapter 15: Power Control
214
Scenario #7
Port power association - associate outlets from 6
different power strips to one port
Pre-condition
Administrator user is logged in via CLI.
6 Power Strip devices (DPX) are physically connected
and configured to SX.
User is in power menu.
Action
Enter Command to associate Port1 to Outlet1 of
PowerStr1.
Press Enter.
Repeat steps 1 and 2 to associate Port1 with Outlet1
from each of the other PDUs.
CLI Input
associate port 1 powerstrip PowerStr1 outlet 1
associate port 1 powerstrip PowerStr2 outlet 1
associate port 1 powerstrip PowerStr3 outlet 1
associate port 1 powerstrip PowerStr4 outlet 1
associate port 1 powerstrip PowerStr5 outlet 1
associate port 1 powerstrip PowerStr6 outlet 1
Scenario #8
Port power association - edit outlet names
Pre-condition
Administrator user is logged in via CLI.
Power Strip device (DPX) is physically connected and
configured to SX named PowerStr1.
User is in power menu.
Action
Enter Command to edit outlet1 name of PowerStr1.
Press Enter.
CLI Input
outlet name PowerStr1 outlet 1 newname TestName
Remove Port Power Association
Description: Power Control Menu - Remove a power outlet association
from an SX port.
Scenario #1
Remove port power association
Pre-condition
Administrator user is logged in via CLI.
Power Strip device (DPX) is physically connected and
configured to SX named PowerStr1.
User is in power menu.