User guide

Chapter 15: Power Control
213
Scenario #4
Port power association - associate one outlet to
two ports
Power Strip device (DPX) is physically connected and
configured to the SX named PowerStr1.
User is in power menu.
Action
Enter command
Press Enter
CLI Input
associate port 1 powerstrip PowerStr1 outlet 1
associate port 2 powerstrip PowerStr1 outlet 1
Scenario #5
Port power association - associate all available
outlets to ports
Pre-condition
Administrator user is logged in via CLI.
Power Strip device (DPX) is physically connected and
configured to the SX named PowerStr1.
User is in power menu
Action
Enter command.
Press Enter.
Repeat steps 1 and 2 for all available Outlets with up
to 6 outlets associated to a single port.
CLI Input
associate port 1 powerstrip PowerStr1 outlet 1
Scenario #6
Port power association - associate outlets to one
port from different power strips
Pre-condition
Administrator user is logged in via CLI.
Two Power Strip devices (DPX) are physically
connected and configured to the SX respectively
named PowerStr1 and PowerStr2.
User is in power menu.
Action
Enter command to associate Port1 to Outlet1 from
PowerStr1.
Press Enter.
Enter command to associate Port1 to Outlet1 from
PowerStr2.
Press Enter.
CLI Input
associate port 1 powerstrip PowerStr1 outlet 1
associate port 1 powerstrip PowerStr2 outlet 1