User guide

Chapter 15: Power Control
212
Scenario #2
Port power association - associate 6 outlets to one
port
Pre-condition
Administrator user is logged in via CLI.
Power Strip device (DPX) is physically connected and
configured to DSX named PowerStr1.
User is in power menu.
Action
Type command - associate [port port] [powerstrip
powerstrip] [outlet outlet] to associate Outlet1 to Port1
Press Enter.
Repeat steps 3 and 4 for Outlet 2, 3, 4, 5 and 6.
CLI Input
associate port 1 powerstrip PowerStr1 outlet 1-6
Scenario #3
Port power association - associate 6 outlets to one
port spread across two PDUs
Pre-condition
Administrator user is logged in via CLI.
Two Power Strip devices (DPX) are physically
connected and configured to the SX, respectively
named PowerStr1 and PowerStr2.
User is in power menu.
Action
Type command - associate [port port] [powerstrip
powerstrip] [outlet outlet] to associate Outlet1 of
PowerStr1 to Port1
Press Enter.
Repeat steps 1 and 2 for Outlet 2 and 3.
Type command - associate [port port] [powerstrip
powerstrip] [outlet outlet] to associate Outlet1 of
PowerStr2 to Port1
Press Enter.
Repeat steps 4 and 5 for Outlet 2 and 3.
CLI Input
associate port 1 powerstrip PowerStr1 outlet 1,2,3
associate port 1 powerstrip PowerStr2 outlet 1,2,3
Scenario #4
Port power association - associate one outlet to
two ports
Pre-condition
Administrator user is logged in via CLI.