User guide

Chapter 15: Power Control
206
2. Click Add. The Port Power Association page opens.
3. Select the port from the drop-down menu in the Port field.
4. Select the power strip name from the drop-down menu in the Power
Strip field.
5. Select the outlet to associate with the port from the drop-down menu
in the Outlet field.
6. Click Add.
Note: It is not recommended to access the port associated with a
power strip via RSC or CLI. Accessing the power strip directly will
display a raw character stream of commands between SX and the
power strip and you will be write-locked from any control.
Delete a Port Power Association
To delete a port power association:
1. Choose Setup > Port Power Association List.