User guide

Chapter 14: Intelligent Platform Management Interface
203
-H hostname Remote host name for LAN
interface
-p port Remote RMCP port [default=623]
-U username Remote session username
-f file Read remote session password from file
-S sdr Use local file for remote SDR cache
-a Prompt for remote password
-e char Set SOL escape character
-C ciphersuite Cipher suite to be used by lanplus
interface
-k key Use Kg key for IPMIv2 authentication
-L level Remote session privilege level
[default=ADMINISTRATOR]
-A authtype Force use of auth type NONE,
PASSWORD, MD2, MD5 or OEM
-P password Remote session password
-E Read password from
IPMI_PASSWORD environment variable
-m address Set local IPMB address
-b channel Set destination channel for bridged
request
-l lun Set destination lun for raw commands
-t address Bridge request to remote target address
-o oemtype Setup for OEM (use 'list' to see
available OEM types)
-O seloem Use file for OEM SEL event
descriptions
Interfaces:
open Linux OpenIPMI Interface [default]
imb Intel IMB Interface
lan IPMI v1.5 LAN Interface
Commands:
raw Send a RAW IPMI request and print response
i2c Send an I2C Master Write-Read command and
print response
lan Configure LAN Channels
chassis Get chassis status and set power state