User guide

Chapter 13: Command Line Interface
180
[ip ipaddress]
IP address of the target system where the
backup will be written.
<login login>
Username of the account on the system where
the backup will be stored.
<password
password>
Password of the account on the system where
the backup will be stored.
[path pathname]
Specifies the path to the backup file.
[file filename]
Specifies the name of the file in which the
backup will be saved.
backup Command Example
In this example, the console server data is sent to a system at the IP
address 192.168.51.220. The guest account and password are used.
The data will be saved at the top level of the guest account as a file
named backupfile.
admin > system > backup ip 10.0.0.188 login sx password
qaz1wsx path /home/backup file bac
Cleareventlog Command
The cleareventlog command clears the contents of the local event log.
Syntax
Cleareventlog
cleareventlog Command Example
admin > Config > Log > cleareventlog
Factoryreset Command
The factoryreset command returns the Dominion SX console server to its
default factory settings.
Important: If you choose to revert to the factory settings, you will
erase all your custom settings and will lose your connection to the
Dominion SX because, upon rebooting, the IP address of the unit
will be reset to the factory default IP address of 192.168.0.192. If the
network is running a DHCP server, the unit will be reset to a
different IP address, because DHCP is enabled by default when the
unit is reverted to factory settings.