User guide

Chapter 13: Command Line Interface
167
public community-string
Community string
snmp Command Example
admin > Config > SNMP > snmp enable true public XyZZy1
Configuring Time
Time-related configuration mode commands:
 clock
 ntp
 timezonelist
Clock Command
The clock command allows you to set the time and date for the server.
Syntax
clock [tz timezone] [datetime datetime-string]
clock Command
Description
tz timezone
The timezone index is a number
corresponding to the desired time zone.
datetime
datetime-string
The date and time string for the console
server unit. Enter in the following format:
"YYYY-MM-DD HH:MM:SS"
timezonelist
Using this option displays a list of time zones
and index values. Use the index values with
the [tz] option.
clock Command Example
The following command sets the Dominion SX date and time to
12-Jul-06, 09:22:33 AM, in time zone 21.
admin > Config > Time > clock tz 21 datetime "2006-07-12
09:22:33"
NTP Command
The ntp command lets you determine if a Network Time Protocol (NTP)
server should be used to synchronize the Dominion SX clock to a
reference.
Syntax
ntp [enable <true | false>] [primip primip] [secip secip]