User guide

Chapter 13: Command Line Interface
166
SMNP Add Command
The add command adds trap recipients. A recipient is an IP address with
an optional space- separated port number. Traps may be sent to multiple
ports with the same IP address.
Syntax
add [dest ipaddress] [port value]
add Command
Description
dest ipaddress
SNMP destination IP
address
port value
SNMP destination port
SNMP add Command Example
admin > Config > SNMP > add 72.236.162.33 78
SNMP Delete Command
The SNMP delete command deletes trap recipients. A recipient is an IP
address with an optional space-separated port number. When removing
a recipient with a port number, include the port number in the delete
command. Traps may be sent to multiple ports with the same IP address.
Syntax
delete [dest ipaddress]
delete
Command
Description
dest ipaddress
SNMP destination ip address to be
deleted
SNMP delete Command Example
admin > Config > SNMP > delete 72.236.162.33
SNMP Command
The SNMP command controls SNMP traps and specifies the community
name used to send traps.
Syntax
snmp [enable <true|false>] [public community-string]
snmp Command
Description
enable <true|false>
Enable/Disable SNMP