User guide

Chapter 13: Command Line Interface
165
Telnet Command
Syntax
telnet [enable <true|false>] [port value]
telnet Command
Description
enable <true|false>
Enable or disable Telnet access.
port value
Telnet server tcp listen port
telnet Command Example
The command below enables telnet access on port 23.
admin > Config > Services > telnet enable true port 23
fixedtcpwindow Command
The fixed TCP Window is enabled by default. The Fixed TCP window
command is used to disable automatic TCP window scaling. This is
necessary for some Windows Vista
®
clients to be able to properly
connect to the Dominion SX. If you notice connection issues to the
Dominion SX, you may need to disable this.
Syntax
fixedtcpwindow [enable <true|false>]
enable <true|false> enable fixed tcp windows, or
disable(allow TCP
window scaling)
fixedtcpwindow Command Example
admin > Config > Services > fixedtcpwindow enable true
Configuring SNMP
The Dominion SX server supports sending SNMP alerts to a predefined
SNMP server. The Raritan SNMP MIB is found in the FAQs in the
support section of the Raritan web site. The following commands
configure the SNMP features:
 add
 delete
 snmp