User guide

Chapter 13: Command Line Interface
157
In both cases above, port 1 will have ssh port 7000 and telnet port 8000
assigned for direct port access, port 2 will have ssh port 7001 and telnet
port 8001, and so on.
Other DPA TCPPort options:
config <port *> <ssh tcpport>
config <port portnumber> <ssh tcpport>
config <port port_range> <ssh tcpport>
config <port *> <telnet tcpport>
config <port portnumber> <telnet tcpport>
config <port port_range> <telnet base_tcpport>
To configure all ports using a block of contiguous port numbers, use the
<port *> command. If port_range is specified, a block of contiguous port
numbers will be used. The given value of base_tcpport is used as
starting value. For individual port configuration, the <port portnumber>
command can be used.
Ports Keywordadd Command
Keywords can be configured per port. After a keyword is configured for a
port, if the event is selected for notification, an SMTP notification is sent
upon detecting this keyword in the data coming from the target
connected to the port.
Syntax
keywordadd [port <number|range|*>] [keyword value]
keywordadd Command Example
admin > configuration > ports > keywordadd port 1 keyword
ll
Ports Keyworddelete Command
The keyworddelete command removes an existing keyword.
Syntax
keyworddelete [keyword value]
keyworddelete Command Example
admin > configuration > ports > keyworddelete keyword ll