User guide

Chapter 13: Command Line Interface
155
ports config Command Example
admin > ports >config port 1 name ld1 bps 115200 parity
odd flowcontrol hw detect true escapemode none emulation
VT100
The following command displays the current settings for port 1:
admin > Config > Port > config port 1
Port number 1:
Name: Port1
BPS: 9600
Parity: 0
Flow control: 0
RSC Terminal Emulation: VT100
Disconnect: Disabled
Application: RaritanConsole
Exit String:
Escape: Control-]
DPA:
IP: 0.0.0.0
Telnet Port: 0
SSH Port: 0
Always Active: False
Messages suppressed: none
The following example configures DPA port settings when the you
choose DPA mode IP. The IP Address is assigned for direct port access
using the following command:
admin > Config > Port > config port 1 dpaip 10.0.13.1
admin > Config > Services > dpa mode IP (upper case for IP!)
After this option is enabled, the SX unit is restarted. DPA changes will
not be available until after the Dominion SX is rebooted.
ssh -l sx_user 10.0.13.1
Password:
Authentication successful.