User guide

How to - Dominion SX Essentials
xvii
Case 6. Performing Factory Reset on SX
To set SX configuration back to factory defaults through the
GUI:
1. Log in to SX via a web browser with your login username and
password, such as (admin/raritan).
2. Choose Maintenance > Factory Reset. You will be prompted to
confirm your decision.
3. Do not power off SX unit as it reboots with default configuration.
4. You will be re-directed to the login page after the unit is rebooted. If
you try to log in for the first time after reset, you'll be advised that you
are now in the factory default mode, and promoted for changing
password after logging in with default username and password.
See Performing a Factory Reset on the SX (on page 111) for details.
Case 7. Managing User Profiles on SX
To create, update, or delete an SX user:
1. Log in to SX via a web browser with your login username and
password, such as (admin/raritan).
2. Choose User Management > User List and the page will display a list
of user profiles created.
3. To create a user profile, click Add New User.
4. To modify an existing user profile, see Modify a User Profile (on
page 32) for details.
5. To delete an existing user profile, see Delete a User Profile (on
page 33) for details.
See Create a User Profile (on page 31) for details.
Case 8. Accessing Port Access on SX via RSC
To access an SX serial target through Raritan Serial Client
(RSC):
1. Log in to SX via a web browser with your login username and
password, such as (admin/raritan).