User guide

Chapter 13: Command Line Interface
146
The Remote LDAP Server user's configuration should be:
Dialback with remote TACACS user (Tacacs+ v.4.0.3a)
Dial-in and Dialback should be enabled on the device used for modem
communication. Primary (or/and Secondary) TACACS Server Settings
should be configured correctly and enabled on the Dominion SXs:
Primary Server
Enabled - true
IP Address - 10.0.0.188
Port - 49
Secret - alabala
On the Remote Tacacs Server user's configuration should own the
following line:
user-dialback='129'
Configuring Network
The Network menu commands allow you to configure the Dominion SX
network adapter.
Commands
Description
ethernetfailover
Enable/Disable network failover
interface
The Dominion SX network interface
configuration
ipfowarding
IP forwarding configuration
name
Network name configuration
ports
Network port configuration
route
Show kernel routing table