User guide

Chapter 1: How to - Dominion SX Essentials
xvi
3. Click OK.
See Configuring LDAP (on page 39) for details.
Case 5. Creating Power Association Group
To associate the target server with more than one power outlets
physically connected to it:
1. After logging in to SX via a web browser, make sure a power strip
has been configured previously (To add a power strip: choose Setup
> Power Strip Configuration. See Power Strip Configuration (on
page 207) for details). Choose Setup > Port Power Association List
and click Add.
2. Select the SX port connected to the dual-powered server device with
which you want to associate outlets from the drop-down menu of
Port, and enter a description for it, such as "Internal Web Server
Pronto" (see Port Power Associations (on page 205) for details).
3. Select the Power Strip and outlet from the drop-down menu to match
how the device is connected to power. Click Add and the information
will appear in the text box as "[Power Strip Name] \ [outlet 1]". Select
the same power strip and another outlet, then click Add to add it.
Another line will display in the text box as "[Power Strip Name] \
[outlet 2]". Click OK to commit the changes.
4. Choose Setup > Power Association Group List and click Add (see
Power Association Groups (on page 207) for details).
5. Enter a group name and description, then the port ID from the
"Available" box (multiple selection is permitted), and click Add to add
to the "Selected" box.
6. Click OK to commit changes.
See Power Strip Configuration (on page 207) for details on how to add
power strips to SX management first. If this wasn't already done, see
Port Power Associations section to map power strip outlet to a target
server connected to an SX serial port, and then see Power Association
Groups (on page 207) for details on how to group multiple power outlets
physically connected to that same target server.