User guide

Chapter 13: Command Line Interface
118
Accessing the Dominion SX Using CLI
Access the Dominion SX using one of these methods:
 TELNET via IP connection
 HTTP and HTTPS via IP connection
 SSH (Secure Shell) via IP connection
 Local Port-via RS-232 serial interface
Many SSH/TELNET clients are available and can be obtained from the
following locations:
 PuTTY - http://www.chiark.greenend.org.uk/~sgtatham/putty/
http://www.chiark.greenend.org.uk/~sgtatham/putty/
 SSH Client from ssh.com - www.ssh.com http://www.ssh.com
 Applet SSH Client - www.netspace.org/ssh
http://www.netspace.org/ssh
 OpenSSH Client - www.openssh.org http://www.openssh.org
SSH Connection to the Dominion SX
Use any SSH client that supports SSHv2 to connect to the device. You
must enable SSH access from Network Service Settings page (See
Change Network Service Settings (on page 25)).
Note: For security reasons, SSH V1 connections are not supported by
the Dominion SX.
SSH Access from a Windows PC
To open an SSH session from a Windows
®
PC:
1. Launch the SSH client software.
2. Enter the IP address of the Dominion SX server. For example,
192.168.0.192.
3. Choose SSH, which uses the default configuration port 22.
4. Click Open.
The login as: prompt appears.