User guide

Chapter 11: Maintenance
111
Display a Firmware Upgrade History
To display the firmware upgrade history for an SX unit, choose
Maintenance > Firmware Upgrade History. The Firmware Upgrade
History page opens, displaying the version of each past firmware
upgrade and the date and time the upgrade was performed.
Performing a Factory Reset on the SX
Performing a factory Reset returns the SX unit to its default factory
settings. Be very careful when doing this, because it will erase all the
data and settings on the SX unit and return it to the state in which it was
originally shipped.
To perform a factory reset, choose Maintenance > Factory Reset. You
will be prompted to confirm the reset. Click Yes to proceed. If you
change your mind, click No.
Note: In case you are not aware of the administrative password to log in
the SX GUI to perform a factory reset, you may want to try resetting from
the SX hardware. To do so, insert a pin into the RESET hole on the back
panel of the SX unit and hold for about 15 seconds. The SX is then reset
to factory defaults.
Rebooting the SX
Performing a reboot powers the SX off and then back on. Be careful
when doing this, because it will log all current users off the system.
To perform a reboot, choose Maintenance > Reboot You will be
prompted to confirm the reboot. Click Yes to proceed. If you change your
mind, click No.