User guide

Chapter 10: Logging
103
Create a New SNMP Destination
SNMP destinations determine which SNMP management stations
receive SNMP traps.
To create a new SNMP destination:
1. Go the SNMP Destination panel and type the IP address of the new
destination in the IP Address field.
2. By default, the new destination will use the standard SNMP port of
162. Change this to another port by entering a different port number
in the Port field. Click OK.
Note: To display the SNMP Management Information Base (MIB),
click the View SNMP-MIB link in the SNMP Settings Panel (as shown
in Enable SNMP Logging (on page 102)).