User guide

Chapter 10: Logging
100
Available events include:
 event.amp.notice.port.connection
 event.amp.notice.user.logoff
 event.amp.notice.backup
 event.amp.notice.restore
 event.amp.notice.config.directaccesslockout
 event.amp.notice.reboot
 event.amp.notice.boot
 event.amp.notice.config.datacom
 event.amp.notice.config
 event.amp.notice.upgrade
 event.amp.keyword
 event.amp.strongpasssword
 event.amp.banner
 event.amp.firewall
 event.amp.iptablesaved
 event.amp.security.clientauth
 event.amp.security.clientcert.ca
 event.amp.security.clientcert.crl.expired
 event.amp.security.clientcert.crl.updated
2. In the Destination field, type the email address to which you want to
send the event.
3. Click OK.
Test SMTP Logging
It is important that the SMTP server information be accurate so that the
Dominion SX unit can send messages using that SMTP server.
To verify that the information is correct and working:
1. Send a test email by selecting an event such as:
event.amp.notice.port connection
2. Connect to a port and see if the message is received by the intended
email target. If there are problems, contact your SMTP administrator
to make sure your SMTP server IP address and authorization
information are correct.