Specifications

130 DOMINION SX INSTALLATION AND OPERATIONS MANUAL
Lightweight Directory Access Protocol (LDAP)
Using Dominion SX software revision 2.1 or higher, your Dominion SX unit can authenticate users via
LDAP/S (LDAP Secure). If your Dominion SX unit does not have revision 2.1, upgrade via the upgrade
feature and download the appropriate software from http://
www.raritan.com/support to gain access to the
LDAP feature.
Figure 107 LDAP Configuration Screen
1. Click on the LDAP tab.
2. Verify that the LDAP or LDAP(S) server is running, and confirm its IP Address and TCP port number,
and other information required to communicate with it (check with your LDAP server administrator).
We recommend you obtain this information before you start configuring LDAP on the Dominion SX.
3. Click on the Enable LDAP check box to enable LDAP.
4. Type a valid IP address in the Primary Server field.
5. The default TCP Port is 389 for LDAP. (For LDAP(S), type 636 in the Port field).
6. Type the secret password in the Secret field.
7. Re-type the secret password in the Confirm Secret field.
8. Type the base directory name in the Base DN field.
9. Type search information in the Base Search field.
10. Type a valid authorization query string in the Authorization Query String field.
11. If you use a secondary server, click on the Enable Secondary Server check box, and fill in all data for
the secondary server, as outlined above.
12. Click [Update].
13. Click [Save].