User guide

Chapter 8: Port Configuration and Port Access Application
49
TheEditPortscreenappears.

3. Makesuretheportvaluesmatchthetargetsystemʹsserialport
configurationforthefirstthreevalues.
 SelectthevalueofBitsPerSecondfromtheBitsPerSecond
drop‐downmenu.
 SelecttheParityBitsfromtheParityBitsdrop‐downmenu.
 SelecttheFlowControlfromtheFlowControldrop‐do
wnmenu.
4. In
theDetectfield,indicatewhetheryouwanttheDominionSXto
detectornotdetectthephysicalconnectiontothetarget.Thedefault
isNotdetect.ChangebyselectingDetectPhysicalConnectiontothe
Targetfromthedrop‐downmenuintheDetectfi
eld
.
5. TypeacommandintheExitCommandfield.Thisisthecommand
thatwillbesenttoyoursystemwhenauserwithwritepermission
disconnectsfromtheport,forexample,logout.Themain
functionalityofthiscommandistoensurethattheuserʹssessionon
theta
rget
machineisclosed.However,itisnotnecessarytoalways
haveaExitcommandconfiguredonaport.