User guide

Configuring IP Forwarding and Static Routes

2. GototheStaticRoutesListandclickAddNewRoute.TheStatic

Routescreenappears.



3. OnaDSXwithoneLANinterface,LANappearsautomaticallyinthe

Interfacefield.OnaDSXwithtwoLANinterfaces,selecttheoneyou

wantfromthedrop‐downmenuIntheInterfacefield.

 LAN1=eth0

 LAN2=eth1

4. TypetheIPaddress,subnetmask,andga

wayofthedestination

hostintheDestination,MaskandGatewayfields.

5. TypetheTCPmaximumsegmentsize(MSS)inbytesintheMSS

field.

6. TypetheTCPwindowssizeforconnectionsoverthisrouteinbytes

intheWindowfield.

7. Typetheinitialroundtripti

me(I

RTT)forTCPconnectionsoverthis

routein

milliseconds(1‐12000)intheIRTTfield.

8. SelectyourroutetypefromtheFlagsdrop‐downmenu.

 Hostmeansthisrouteisforahostmachine.