User guide

Configuring Modem Access

YoucanaccesstheDSXviaamodem.Tosetthisup:

1. ChooseSetup>Modem.TheModemSettingsscreenappears.



2. ClickthecheckboxlabeledEnableModemtoenablemodemaccess.

3. TypetheIPaddressesofthePoint‐to‐Point(PPP)serverinthePPP

ServerIPfield.Thedefaultis10.0.0.1

4. TypetheIPaddressofthePPPclientinthePPPClientIPfield.The

defaultis10

.0.0.2.

5. Ifyo

uwanttoenablemodemdialback,clicktheEnableModemDial

Backcheckbox.

6. ClickOK.Modemaccessisenabled.

Configuring IP Forwarding and Static Routes

YoucanenableIPforwarding.Youcanalsocreatestaticroutesifyour

DSXhastwoLANportsorisconfiguredformodemaccess.

Enable IP Forwarding

ToenableIPforwarding:

1. ChooseSetup>StaticRoutes.TheStaticRoutesscreenappears.It

consistsofanEnableIPForwardingpanelandaStaticRoutesList.