User guide

Configuring the Network Service Settings

Thetablebelowindicatesthedefaultsettingsforthevariousnetwork

accessservices:

Service Default Setting

HTTP Enabled.Thedefaultportis80.Thiscanbe

changed.

HTTPSredirectisenabledbydefault.IfHTTPS

isalsoenabled,allHTTPrequestsare

automaticallyredirectedtotheHTTPSport(see

below).

HTTPS Enabled.Thedefaultportis443.Thiscanbe

changed.

EncryptionissettoSSL,butthiscanbe

changedtoTLS.

Telnet Disabledforsecurityreasons.Thiscanbe

enabledandtheportconfigured.

LocalPortAccess Enabled.Thebaudrateissetto9600bps,but

thiscanbechanged.

DirectPort

Access

SettoNormalbydefault,butthiscanbe

changedtolPorTCPport.

