User guide

Chapter 5: Network Settings and Services
25

Give the Dominion SX a Name
TogivetheDSXunitanametohelpidentifyit:
1. TypeanameintheUnitNamefield.
2. ClickOK.
Configure the DSX's Network Settings
Toconfigurethenetworksettings:
1. SelecteitherNoneorDHCPfromthedrop‐downmenutodetermine
amethodforIPAutoConfiguration.ThedefaultisNone.
2. TypeanIPaddressfortheDominionSXintheIPAddressfield.
3. TypethesubnetmaskintheSubnetMaskfield.
4. TypetheIPaddressofthegatew
ayrouterinthe GatewayIPAddress
field.
5. Selectthespeedfromthedrop‐downmenuintheModefield.Your
choicesareAuto(default)or100Mbps.
6. TypeyourdomainnameintheDomainfield.
7. ClickOK.
Change the Discovery Ports
TheDominionSXhastwodiscoveryports:
 TCP5000CommonSocketConnection(CSC)discovery
 UDP5000CommandCenter(CC)discovery
Ifeitheroftheseportsisusedbyanotherapplication,youcanchangethe
discoveryportnumberintheDominionSXintheappropriatefieldand
clickOK.
Note:Theportrangeforint
erna
lportconfiguration(CSC,HTTP,HTTPS,
SSH,Telnet,DPASSH,DPATelnet)is1~64510,whiletheconfigurable
portrangeforsocketcreationislimitedto1024~64510.Externalport
configuration(LDAP,RADIUS,TACACS+,SNMP)isnotaffectedbythis
portrangelimitation,butallowedwithfullrangeofconfiguration.