User guide

Chapter 3: Installation
15
Inthisexample,9isthetimezonecode(Step3)andʺ2007‐02‐0509:22:33ʺ
thedate/timestringintheformatʺYYYY‐MM‐DDHH:MM:SSʺ(quotes
required).
Network Configuration
1. TypeConfigurationtochangetheunitʹsconfiguration.
2. TypeNetworktoselectthenetworkconfiguration.
3. Type:
admin > Config > Network > interface enable true if
lan1 ip 192.16.151.12 mask 255.255.255 gw
192.168.51.12
Uponsuccessfullyenteringthedata,areportwilldisplaythenew
networkconfigurationandyouwillbepromptedtoreboottheunit.
4. TypeyestoreboottheDominionSX.
5. Youcannowremovetheserialca
ble.
6. ReconnectfromtheinstallationcomputerbrowsertotheDominion
SXusingthenewIPaddressandpasswordandproceed.
User Configuration
1. TypeConfigurationtochangetheunitʹsconfiguration.
2. TypeUserstoselecttheuserconfiguration.
To add a user group
Typeaddgroup name <group name> class <class type> ports
<n1,n2,n3...>where<groupname>isthenameofthegroupand
<classtype>is
 Opforoperator
 Obforobserver
<n1,n2,n3...>isalistofportnumbersthisgrouphasaccessto,separated
bycomasandnospaces.Youcouldconfigureportrangesusingthesame
parametersaswell,orusethewildc
a
rdasterisk(*).Forexample:
 ʺconfigport3‐7exitstring#0ʺ(thisdisablesexitstringsforports
3,4,5,6,7)
 configport*bps115200(thissetsallportstoacommunications
speedof115200bps)