User guide

Hardware Installation

Network Access

1. Ensurethattheinstallationcomputerhastheroutefor192.168.0.192

andthatitcancommunicatewithIPaddress192.168.0.192.

2. TochecktheroutetableinWindows,typethecommandrouteprint

inaCommandwindowontheinstallationcomputer.If192.168.0.192

isonthegatewaylist,proceedtostep3.Otherwise,add19

2.168

.0.192

tothegatewaylistusingtheappropriateDOSorUNIXCLI

command:

 Windows98/2000/NTsystem:route add 192.168.0.192

<INSTALLATION COMPUTER IP ADDRESS>.

[Example:route add 192.168.0.192 15.128.122.12]

 UNIX(includingSunSolaris)system:

route add 192.168.0.192 <CLIENT_HOST IP ADDRESS>

-interface.

[Example:route add 192.168.0.192 15.128.122.12

-interface]

3. Typeping 192.168.0.192.Gotostep4ifyoureceiveasuccessf ul

replyfromtheDominionSXunit.Ifane

rror

occurs,verifythatthe

defaultIPaddressisenteredcorrectlyandthataroutetothatIP

addressexists.

4. Usetheinstallationcomputertoconnecttotheunitbylaunchinga

browserandtypingthefactorydefaultIPaddress192.168.0.192inthe

Webbrowserʹsaddressbox.

Set Date and Time

1. TypeConfigurationtochangetheunitʹsconfiguration.

2. TypeTimetoselecttheDate/Timeconfiguration.

3. TypeTimezonelistandfindthenumbercodethatcorrespondsto

yourtimezone.

4. Typeclock [tz timezone] [datetime datetime-string].

Thefollowingisanexample:

admin > Config > Time > clock tz 9 datetime "2007-02-05

09:22:33"