User guide

Microsoft IAS RADIUS Server
276
Add Dominion SX to the client list:
1. FromtheInternetAuthenticationService,right‐clickonRADIUS
ClientsandselectNewRADIUSClient.
2. TypeafriendlynameandtheIPaddressoftheDSXunit.
3. SelecttheRADIUSStandardintheClient‐Vendordrop‐downmenu,
andtypeaSharedSecretthatmatchestheDominionSX
config
ur
ation.
Create an IAS Policy
Thefollowingsectiondescribesthestepstocreateapolicytoallow
RadiususerstoaccesstheDominionSX.Theexampleinthissection
requirestwoconditions,theclientsourceIPaddressoftheDominionSX
andtheUserIDisamemberoftheSXUserGroup:
• NAS‐IP‐Address=TypetheIPaddre
ss
ofDominionSX
• Windows‐Group=SXUserGroup
Note:IfyouhavemultipleDominionSXunitsordifferentmodelsof
Dominionproductfamily(DKX,DKSXorKX101)thenusingan
appropriateconditiontomatch(NAS‐IP‐Address)rulewillhelpapply
thecorrectpolicyfortheappropriateDominionunit.
1. FromInternetAuthenticationService,right‐clickonRemoteAccess
PoliciesandselectNewRemoteAccessPolicy.
2. TheNewRemotePolicyWizardstarts.ClickNext>.
3. SelecttheSetupacustompolicyradiobuttonandtypeaPolicy
name.
4. ThePolicyConditionsdialogappears.ClicktheAdd...button.
5. SelecttheNA
S
‐IP‐AddressnameandclicktheAdd...button.Type
theIPaddressoftheDominionSXunit.
6. TypeasecondconditionusingthenameWindows‐Groupandthe
valueSXUserGroup.ClickNext>.
7. SelecttheGrantremoteaccesspermissionradiobutton.
8. ClickNext>.TheProfiledia
l
ogappears..
9. ClicktheEditProfile...button.
10. ChoosetheAuthenticationtab.Removeothercheckmarksandadda
checkmarktoenableUnencryptedauthentication(PAP,SPAP)