User guide

Dominion SX16 and SX32 Terminal Ports
258
Item Default
Serial Ports
BaudRate 9600
Parity None
FlowControl None

Usethefollowinginformationforinitiatingportaccess:
initiate port access
using
Ports Kept open or Closed directions
HTTP Ports80,443and5000mustbe
keptopeninthefirewallforthe
unittooperate.Port5000canbe
configured.
Both
HTTPSSSL(S)only TCPport443needstobeopen;
port80canbeclosed
Both
SSH TCPport22needstobeopen Both
Telnet TCPport23needstobeopen Both
RADIUS TCPport1812needstobeopen Outgoing
LDAP Port389needstobeopen Outgoing
SNMP Port162needstobeopen Outgoing
TACACS+ Port49needstobeopen Outgoing
Notes;
ForFTPUpgrades Port21needstobeopen Outgoing
Forsyslog UDPport514needstobeopen Outgoing

YoumayneedtoopenadditionalportswhenNFSlogging,LDAPservers,
andsoforth.Theseportsmayvaryfrominstallationtoinstallation,
dependingonnetworktopologies,virtualLocalAreaNetworks(VLANs),
andfirewallconfigurations.Contactyournetworkadministratorfor
site‐specificinformationandsettings.