User guide

Dominion SX16 and SX32 Terminal Ports
256
HereissomeadditionalinformationabouttheDominionSX16andSX32
TerminalPorts:
• Pins1and9areusedtofactoryresetunitsshippedafterAugust2004.
• UnitsshippedpriortoAugust2004.havetheDB9Mportlabeled
RESERVED(notTERMINAL/RESERVED),sincethisportwasused
tofactoryresettheunit,withaFa
ctor
yresetadaptershippedwith
eachSXunit.Pins1and6wereusedforfactoryreset.Thereset
adaptersfortheseearlyunitsaredifferentfromthecurrentunits,
whichhavelocalportfunctionality.
• DSX16andDSX32unitsshippedfromthefactorywiththeSX2.2(o
r
higher
)releasesupportthelocalportcapability.
• DSXversionsthrough2.5havethelocalportdisabledbyfactory
default.
• InDSX3.1orhigher,thelocalportisenabledbydefault.