User guide

CLI Command for Power Control
244
Pre‐condition AdministratoruserisloggedinviaCLI.
Powerstripdevice(DPX)namedPowerStr1is
physicallyconnectedtoPort1ofDSX.
Outlet1andOutlet2areassociatedwithPort1.
Outlet1andOutlet2arewithstatusʺONʺ.
AdministratorisinPowermenu.
Action Checkthecurrentstatusofoutlets‐outlet1isturnon
RemoveOutlet1andOutlet2fromoutletassociation
toPort1.
GotoPowermenuandcheckthestatusofoutlet1.
CLIInput powerstripnamePowerStr1
unassociatedport1powerstripPowerStr1outlet1,2
powerstripnamePowerStr1
Scenario#5 PowerStripStatus‐Outletstatuswhengroup
associationisremoved
Pre‐condition AdministratoruserisloggedinviaCLI.
Powerstripdevice(DPX)namedPowerStr1is
physicallyconnectedtoPort1ofDSX.
GroupassociationnamedGroup1iscreated.
Outlet1andOutlet2arewithstatus“ON”.
AdministratorisinPowermenu.
Action Checkthecurrentstatusofoutlets‐outlet1isturnon
RemoveGroup1.
GotoPowermenuandcheckthestatusofoutlet1.
CLIInput powerstripnamePowerStr1
deletepowergroupnameGroup1
powerstripnamePowerStr1
