User guide

Chapter 15: Power Control
239
Scenario#4 AssociationPowerControl‐RecyclePort
Association(outletsintheassociationarewith
differentstatuses)
Pre‐condition AdministratoruserisloggedinviaGUI.
TwoPowerStripdevices(DPX)namedPowerStr1
andPowerStr2arephysicallyconnectedtoSX
Ports.
PortPowerAssociationnamedTarget2isalready
createdandavailableinthelist.
Outle1ofPowerStr1andOutlet2ofPowerStr2are
associatedtoTarget2.
Outlet1andOutlet2arewi
thdi
fferentstatuses.
AdministratorisinPowerControl>Associations
PowerControlmenu.
Action SelectPortAssociationnamedTarget2
ClickonPowerRecycleIntervalandentervalue:
PressRecyclebutton.
CLIInput PowerRecycleIntervalvalue:1sec.

CLI Association Power Control - Group Association
Description:PowerControlMenu
Scenario#1 TurnONGroupAssociation
Pre‐condition AdministratoruserisloggedinviaCLI.
Administratorisinpowermenu.
GroupAssociationnamedGroup1(showninFg.1)is
alreadycreated.
Action EnterCommand.
PressEnter.
CLIInput Command:onnodegroupGroup1
Scenario#2 TurnONGroupAssociation(outletsinassociation
arewithdifferentstatuses)