User guide

CLI Command for Power Control
230
Scenario
#4
Port power association - associate one
outlet to two ports
Pre‐condition AdministratoruserisloggedinviaCLI.
PowerStripdevice(DPX)isphysicallyconnectedand
configuredtotheDSXnamedPowerStr1.
Userisinpowermenu.
Action Entercommand
Pressenter
CLIInput associateport1powerstripPowerStr1outlet1
associateport2powerstripPowerStr1outlet1
Scenario
#5
Port power association - associate all
available outlets to ports
Pre‐condition AdministratoruserisloggedinviaCLI.
PowerStripdevice(DPX)isphysicallyconnectedand
configuredtotheDSXnamedPowerStr1.
Userisinpowermenu
Action Entercommand.
Pressenter.
Repeatsteps1and2forallavailableOutletswithup
to6outletsassociatedtoasingleport.
CLIInput associateport1powerstripPowerStr1outlet1
Scenario
#6
Port power association - associate outlets
to one port from different power strips
Pre‐condition AdministratoruserisloggedinviaCLI.
TwoPowerStripdevices(DPX)arephysically
connectedandconfiguredtotheDSXrespectively
namedPowerStr1andPowerStr2.
Userisinpowermenu.