User guide

Chapter 15: Power Control
223
2. ClickAdd.ThePortPowerAssociationscreenappears.

3. Selecttheportfromthedrop‐downmenuinthePortfield.
4. Selectthepowerstripnamefromthedrop‐downmenuinthePower
Stripfield.
5. Selecttheoutlettoassociatewiththeportfromthedrop‐downmenu
intheOutletfield.
6. ClickAdd.
Note:Itisnotrecommendedtoacce
sstheportassociated
witha
powerstripviaRSCorCommandLineInterface.Accessingthe
powerstripdirectlywilldisplayrawcharacterstreamofcommands
respondinginbetweenDSXandthepowerstrip,whileyouare
write‐lockedfromanycontrol.

Note:PowercontrolisnotsupportedonthelastportoftheDSXunit.
Thelastportoftheunitcanbeusedfornon‐powercontroldevice.