User guide

Maintenance Commands
194
Cleareventlog Command
Thecleareventlogcommandclearsthecontentsofthelocaleventlog.
Thesyntaxofthecleareventlogcommandis:
Cleareventlog
Cleareventlog Command Example
admin > Config > Log > cleareventlog

Factoryreset Command
ThefactoryresetcommandreturnstheDominionSXconsoleservertoits
defaultfactorysettings.
Important:Ifyouchoosetoreverttothefactorysettings,youwillerase
allyourcustomsettingsandwillloseyourconnectiontotheDominion
SXbecause,uponrebooting,theIPaddressoftheunitwillberesetto
thefactorydefaultIPaddressof192.168.0.192.Ifthenetworkis
runningaDHCPserver,theunitwillberesettoadifferentIPaddress, 
bec
a
useDHCPisenabledbydefaultwhentheunitisrevertedto
factorysettings.