User guide

IPMI Commands
186
Command Description
ifconfig Showdetailednetworkconfiguration
netstat Printnetworkconnections
ping Pingaremotesystem
ps Reportsystemprocessstatus
traceroute Tracethenetworkroutetoahost.
[‐dnrv][‐mmaxttl][‐pport#][‐qnqueries][‐s
srcaddr][‐ttos][‐wwait]host[datasize]

IPMI Commands
TheIPMIDiscoverandIPMIToolcommandsprovidethecapabilityto
workwithIPMI‐supporteddevices.
IPMIDISCOVER
TheipmidiscovertoolisusertodiscoverIntelligentPlatform
ManagementInterface(IPMI)serversinthenetwork.
• TheIPaddressrangecanbesetusingstartIPandendIP.
• OnlyusersbelongingtotheAdministratorgroupareableto
configurethesupportofIPMI.ThesupportedIPMIversion2.0.
Theipmidiscovertoolsy
ntaxis:
ipmidiscover [OPTIONS] startIP endIP
Alldiscovere
dtargetssupportingIPMIversion2.0willbelisted,
allowingtheusertoselectoneandexecutetheIPMIoperations.
Thecommandoptionsaredescribedinthefollowingtable:
Command Description
[OPTIONS] Twooptionsaresupported:
‐ttimeout[seconds]tocompletethediscovery
‐iinterval[seconds]betweeneachping
startIP BeginningIPaddress
endIP EndingIPaddress