User guide

Chapter 13: Command Line Interface
183
sharing<true|false> Indicatewhetherportaccessisshared
whiletheportisbeingutilized.
Command Example
admin > Config > User > editgroup name unixgroup class
op ports 1,4 power 1,4

Edituser Command
Theeditusercommandisusedtomanageinformationaboutaspecified
user.
Thesyntaxoftheeditusercommandis:
edituser [user loginname] [fullname user's-fullname]
[group name] [dialback phonenumber] [password password]
[info user-information] [active <true|false>]
Theeditusercommandoptionsaredescribedinthefollowingtable.
Command Description
userloginname LoginName(Required)
fullname
userʹs‐fullname
Userʹsfullname
groupname Grouptoassociatewithuser
dialbackphonenumber Dialbackphonenumberforthisuser
passwordpassword Userʹspassword
infouser‐information Miscellaneoususerinformation
active<true|false> Activate/Deactivateuseraccount
Edituser Command Example
Thefollowingexampleshowshowtochangeauserʹspassword.
admin > Config > User > edituser user admin password
newp/w
